|
|
|
Home »
Apparels »
Off-Road »
Eyewear »
Progrip »
3450 Series |
 |
Progrip 2008 Stealth
Motorcycle Dirtbike 3450 Series Goggles |
|
The Race Passion Company |
|
|
|
 |
|
| Stealth Motocross 3450 Series Goggles - $56.99 -
$61.99 |
|
|
| Progrip 2008 Stealth Motorcycle Off-Road 3450 Series Goggles Specifications |
. Ranked number one frame and lens system in the Industry the 3450
ERGO Frame,
nicknamed the SUPER GOGGLE, is now available in a lacquered gel
finish
. TRIPLE felted foam for one of the most comfortable fits in the
industry
. 3 silicon Beads on Strap of high quality Silicon that doesn't
crumble when you stretch it
. PROGRIP PATENTED NO FOG LENS TECHNOLOGY-rated the best NO FOG
performance
on the market
. FASTEST Light Sensitive Lens on the Market: from Clear to Smoke in
less than 4
seconds! Great for variable lighting conditions
. PROGRIP lens system with built in Tear-Off Posts
. Precut Foam and Molded channels for ear stems to allow for most
eyeglasses
Note:
. No available image for Pink and Black Stealth 3450 Series Goggles
|
|
|
Progrip
Apparels
2008
Models! |
.
Progrip Light-Sensitive 3400 Series MX Goggle |
.
Progrip Special 3450 Series MX Goggle |
.
Progrip Stealth 3450 Series MX Goggle |
|
|
About
Progrip Gear |
QUALITY CONTROL ON ALL OPERATIONAL STAGE OF
PRODUCTION:
The customer is the real employer of Plastiche Cassano staff. To
give the customer the maximum
satisfaction of service and quality, it is necessary that we all in
Plastiche Cassano commit ourselves in full, with honesty and severe
control during all phases of production in order to obtain the best
of quality. There is not much difference between working well or
badly, but in the long term unsatisfactory results can be very
damaging for us all.
How we obtain the high standard of quality of our products:
1. Over 50 years of experience - Mainly we have achieved it through
long experience. We started to manufacture our products in 1960, in
the old factory of via Roma n. 13. In the same year we became
members of the Chamber of Commerce with number 84585. However the
owners of Plastiche Cassano originated from the family business
founded by the grandfather, Mr. Francesco Assaghi. The old company
was founded in 1925 and was situated in Cassano Magnago, via Mazzel,
42. It was specialized in the production of handlebar grips made
with buffalo horn. Immediately after World War II, the first
handlebar grips in plastic, backelite and acetate were produced. In
those days the production capacity was of about 1.000 pairs of grips
per day. Nowadays we produce over 100.000 pairs of grips per day.
70% of our products are exported worldwide.
2. Quality raw materials from higly reputable - It is vital for us
is to are raw materials of top quality, bought from highly reputable
suppliers, with consistency of top quality. The raw materials comply
with the European Safety regulations. Standard EN/71 (non toxic).
The Plastiche Cassano Company execute severe quality control over
the raw material both in house, and at specialized laboratories
which issue certificates of quality. Most of our competitors stock
the raw materials in the open. We don't. We stock only indoors in
order to prevent deterioration caused by atmospheric conditions.
3. Quality control in all phases of productions - The production
process is established by firm written rules, and circulated to all
our staff. From the tool making department to the produced goods
departments, everything is properly planned and controlled.
4. Thorough check for products - The quality control of the produced
pieces takes place twice: the first one during the production phase,
when each operator has the necessary time and the obligation of
controlling every single piece produced, and every 100 pieces has to
check the aesthetical and dimensional features with specialized
instruments. The second quality control takes place before packing
the products, when an operator performs a further control of
dimensions and finishing of 3 pieces for every single carton, in
total a check varying from 100 to 200 pieces according to the
different model of grips. The products are boxed in strong cartons
of small or medium sizes in order to offer easy handling, and
adequate protection during the transport.
5. Tests during races - For the last 15 years we have submitted our
products marketed under the trade mark "Pro Grip", for race testing
at events up to world championship level in three fields. From these
experienced champions we gather useful information for ever
improving the quality of our mass production.
6. Assurance - All products supplies are covered by insurance for a
maximum liability of one billion lire (about 800.000 $) for any
possible damage, accident or death that should be attributed to our
products.
The whole process is accompanied by the responsible attitude of all
cooperators of the Plastiche Cassano company: from the proprietors
to the last employee. This sound attitude allows us to offer a high
quality product et a reasonable price and to proudly include among
our customers the most important and famous companies in the world
of two wheeled transport - general industry - hospital and
agriculture.
|
|
|
